Evaluation Of Hybrid Rubber Modified Asphalt Mixtures And Pavements A Case Study In Virginia
DOWNLOAD
Download Evaluation Of Hybrid Rubber Modified Asphalt Mixtures And Pavements A Case Study In Virginia PDF/ePub or read online books in Mobi eBooks. Click Download or Read Online button to get Evaluation Of Hybrid Rubber Modified Asphalt Mixtures And Pavements A Case Study In Virginia book now. This website allows unlimited access to, at the time of writing, more than 1.5 million titles, including hundreds of thousands of titles in various foreign languages. If the content not found or just blank you must refresh this page
Evaluation Of Hybrid Rubber Modified Asphalt Mixtures And Pavements A Case Study In Virginia
DOWNLOAD
Author : Jhony Habbouche
language : en
Publisher:
Release Date : 2023
Evaluation Of Hybrid Rubber Modified Asphalt Mixtures And Pavements A Case Study In Virginia written by Jhony Habbouche and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2023 with Asphalt--Additives categories.
Several state departments of transportation have recognized the benefits of modified asphalt mixtures in resisting multiple modes of climate- and load-induced distresses in flexible pavements. Throughout the past 50 years, asphalt binders have been modified with various components such as styrene-butadiene-styrene (SBS) polymers, ground tire rubber, chemicals (e.g., acid), recycled engine oils, etc., to achieve the desired properties. Hybrid rubber modified asphalt (HRMA) is an innovative engineered additive derived from ground tire rubber, elastomeric SBS polymers, and additive technologies. HRMA is specifically formulated to improve the high temperature stiffness and elastic properties of performance graded binders and the storage stability of modified binders. The purpose of this study was to document and assess HRMA field trials constructed in Virginia. This study documented and evaluated the constructability and laboratory performance of two plant-produced HRMA mixtures compared with the Virginia Department of Transportation (VDOT) typical SBS-modified surface mixtures as reference mixtures. No changes from routine established practices in terms of surface preparation, production at the plant, or paving operations were reported. The four mixtures were evaluated in terms of durability, dynamic modulus, resistance to rutting, and resistance to cracking using multi-level performance tests (basic, intermediate, advanced). All the derived observations indicated that HRMA modification could be as beneficial as regular SBS modification and could provide similar or better performance properties and characteristics for the resultant mixtures. The study recommends that VDOT consider the use of HRMA surface mixtures as an alternative to the current use of regular SBS-modified surface mixtures on higher-volume facilities. Since the sections evaluated in this study were placed in 2021, the 2-year performance data and corresponding observations are still considered preliminary. Continued monitoring of field performance will be needed to quantify any benefit of HRMA mixtures in comparison with regular SBS-modified surface mixtures. The study also recommends additional field trials with HRMA mixtures for further performance evaluation.
Evaluation Of Mix Ingredients On The Performance Of Rubber Modified Asphalt Mixtures
DOWNLOAD
Author : Hossein B. Takallou
language : en
Publisher:
Release Date : 1987
Evaluation Of Mix Ingredients On The Performance Of Rubber Modified Asphalt Mixtures written by Hossein B. Takallou and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1987 with Asphalt-rubber categories.
Rubber-modified asphalt pavements have been used in Sweden and the United States since the 1970's. In these applications ground recycled tire particles (1/4 inch minus) are added to a gap-graded aggregate and then mixed with hot asphalt cement. The benefits of adding rubber to the mix include increased skid resistance under icy conditions, improved flexibility and crack resistance, elimination of solid waste, and reduced traffic noise. The major disadvantage of these rubber-modified mixes is their high cost in relation to conventional asphaltic concrete pavements. This research project consisted of a laboratory study of mix properties as a function of variables such as rubber gradation and content, void content, aggregate gradation, mix process, temperature, and asphalt content. Twenty different mix combinations were evaluated for diametral modulus and fatigue at two different temperatures ( -6°C, +10°C). Also, five different mix combinations were evaluated for static creep and permanent deformation. Layered theory was used to evaluate the effects of mixture variations on pavement life. The resulting information was used to develop guidelines for use of rubber asphalt mixes in United States road systems. The findings of the field survey indicate that the rubber-modified asphalt mixture is more susceptible than the conventional mixtures to preparation and compaction problems when adverse weather or equipment problems occur. However, with adequate equipment and favorable weather conditions, the rubber-modified asphalt mixture placement is similar to conventional mixture placement. The field study also indicates that stopping distances can be reduced 20 percent for the rubber-modified pavements in icy conditions. In view of the significant reductions in wintertime stopping distances under icy or frosty road surface conditions, the use of coarse rubber in asphalt pavements should be seriously considered. This is particularly true for areas such as bridge decks, on and off freeway ramps or insulated roadway sections. The findings of the laboratory study indicate that the rubber gradation and content, aggregate gradation, and use of surcharge during sample preparation have considerable effect on modulus and fatigue life of the mix. The results of static creep and permanent deformation tests indicate that the rubber asphalt mixes had low stability and high elasticity. Also, due to greater allowable tensile strain in rubber-modified mixtures, the thickness of the modified mixture can be reduced, using a layer equivalency of 1.4 to 1.0.
Rubber Modified Asphalt Mix
DOWNLOAD
Author : Charles S. Hughes
language : en
Publisher:
Release Date : 1985
Rubber Modified Asphalt Mix written by Charles S. Hughes and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1985 with Pavements, Asphalt categories.
This report summarizes the design and field installation of an asphalt mix containing up to 3.0% closed cell rubber by weight of the mix. The performance is discussed as well as possible reasons for the early failure of the mix. Suggestions are made for avoiding failures if it is decided to use rubber modified mixes in the future.
Performance Of Ground Tire Rubber Modified Asphalt Mixture Overlays Over Jointed Concrete Pavements On Us 60 In The Virginia Department Of Transportation S Richmond District
DOWNLOAD
Author : Harikrishnan Nair
language : en
Publisher:
Release Date : 2022
Performance Of Ground Tire Rubber Modified Asphalt Mixture Overlays Over Jointed Concrete Pavements On Us 60 In The Virginia Department Of Transportation S Richmond District written by Harikrishnan Nair and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2022 with Asphalt concrete-Additives categories.
Ground tire rubber (GTR) from scrap tires is used in asphalt mixtures (rubber modified asphalt [RMA]) for improving the performance of pavements. There are different ways to add GTR in asphalt mixtures, but the two primary methods are referred to as the “wet” and “dry” processes. The dry process incorporates GTR directly into the asphalt mixture during production (directly to the aggregates through the reclaimed asphalt pavement collar). The Virginia Department of Transportation (VDOT) has limited experience with RMA mixtures in Superpave dense-graded mixtures using the dry process, but the relative ease of mixture production makes the dry process an attractive option for RMA. In the fall of 2019, VDOT placed a dense-graded RMA mixture, SM 12.5 (GTR), on US 60 in VDOT’s Richmond District (New Kent County). This was the first use of a SM 12.5 (GTR) mixture in Virginia using the dry process method. The purpose of this study was to establish a performance baseline for a GTR modified dense-graded asphalt mixture that was designed and produced using the dry process. The US 60 project also included the use of a thin hot mix asphalt concrete overlay (THMACO) as an interlayer. An assessment of the THMACO as an interlayer was a secondary objective of the study. The study found that dry process SM 12.5 (GTR) mixture can be produced and placed with no significant field-related concerns and that the special provision developed for its use was effective. Density requirements were achieved, and the as-placed mat had excellent (very low) permeability characteristics. Laboratory performance testing showed the SM 12.5 (GTR) mixture to be more crack resistant than conventionally modified polymer (SM 12.5E) mixtures. Conventionally modified SM E mixtures had slightly better rutting performance. However, this conclusion was based on performance testing and thresholds that were developed for non-modified asphalt mixtures. Additional laboratory and field performance comparison is needed to develop mixture acceptance criteria for GTR mixtures. Further, THMACO mixtures had excellent laboratory reflective cracking resistance properties. They performed particularly well in the Texas overlay test. Grading of extracted (from the asphalt mixture) binder may not provide an accurate representation of the binder performance for the dry process GTR modified asphalt. Continued monitoring of performance will be needed to quantify any benefit of SM 12.5 (GFR) mixtures in comparison with regular SM E mixtures. The study recommends additional field trials with SM 12.5 (GTR) mixtures for performance evaluation. Further, the study recommends continued use of a THMACO as an interlayer to mitigate reflective cracking for composite pavements.
Advances In Waste Processing Technology
DOWNLOAD
Author : Abu Zahrim Yaser
language : en
Publisher: Springer Nature
Release Date : 2020-05-20
Advances In Waste Processing Technology written by Abu Zahrim Yaser and has been published by Springer Nature this book supported file pdf, txt, epub, kindle and other format this book has been release on 2020-05-20 with Business & Economics categories.
This book highlights the latest research on waste processing technologies, particularly for domestic, agricultural, and petroleum based pollutants, intended to achieve waste valorisation. In addition, it discusses the important role of plastic recycling, as well as advanced waste processing techniques.
Evaluation Of Highly Polymer Modified Asphalt Mixtures Phase I
DOWNLOAD
Author : Benjamin F. Bowers
language : en
Publisher:
Release Date : 2018
Evaluation Of Highly Polymer Modified Asphalt Mixtures Phase I written by Benjamin F. Bowers and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2018 with Asphalt categories.
Reflective cracking in asphalt overlays placed over jointed concrete pavement has been a concern of the Virginia Department of Transportation (VDOT) for years. Although there are many techniques to delay crack propagation through an asphalt overlay, they may require specialized equipment, unique mix designs, or other specific mixture additives. The introduction of highly polymer-modified (HP) binders to the market brings forward a new potential crack mitigation method requiring only the use of the HP binder in an asphalt mixture to provide mitigation. Before asphalt mixtures with HP binder were used on a jointed concrete overlay project, a trial project to evaluate the constructability and laboratory performance of a mixture using this type of binder was conducted. The trial project compared an asphalt surface mixture with an HP binder and a standard surface mixture (control) in a mill and resurfacing pavement project in a subdivision in Northern Virginia. The asphalt surface mixture with the HP binder was found to be constructible without major changes in paving operations; in addition, the laboratory performance was equivalent or superior to that of the control mixture. The results were promising enough to support investigating the use of HP binders in asphalt mixtures over jointed concrete as a reflective crack mitigation technique or when deemed appropriate as a tool for increased crack resistance. The study recommends that VDOT consider the use of asphalt mixtures with HP binders as a tool for increased crack resistance when deemed appropriate by the appropriate VDOT decision maker (e.g., the district materials engineer). The study also recommends that the Virginia Transportation Research Council and the VDOT districts with concerns about reflective cracking potential in asphalt overlays investigate the use of HP mixtures as a reflective crack mitigation layer.
Reacted And Activated Rubber Rar Modified Dense Graded Asphalt Mixtures Design And Performance Evaluation
DOWNLOAD
Author : Sampat Kedarisetty
language : en
Publisher:
Release Date : 2018
Reacted And Activated Rubber Rar Modified Dense Graded Asphalt Mixtures Design And Performance Evaluation written by Sampat Kedarisetty and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2018 with Asphalt categories.
The modification of asphalt mixtures with rubber in the conventional process includes specialized equipment for mixing and storage and concurrently necessitates reheating prior to use. Reacted and Activated Rubber (RAR) is a novel rubber-based asphalt mixture modifier that can be added into the mixture matrix without the complexities associated with wet mixing. The objective of this study was to design and assess the performance of RAR-modified dense-graded asphalt mixtures against key pavement distresses. Furthermore, the performance of RAR-modified mixtures was compared to the unmodified and commercially available rubber-modified asphalt-based mixtures. Two levels of RAR dosage at 2 and 4 % by total weight of mix were included with two different base binders. Four performance characteristics were analyzed: resistance to rutting at high temperatures, failure by fatigue, fracture energy, and susceptibility to moisture damage. Increased rut resistance and higher fatigue lives were observed for higher RAR contents. Statistical analyses revealed insignificant changes in fracture energy among the different mixtures, and all the mixtures were found to be resistant to moisture damage. RAR was concluded as a compatible promising rubber modifier with a significant potential to improve resistance of asphalt pavements against distresses and capable of providing extended life cycles. Because RAR showed significant improvement in the performance of the dense-graded asphalt mixtures, this study recommended expanding the scope of utilizing the RAR materials with other aggregate gradations both at the laboratory and field levels in future.
Evaluation Of Warm Mix Additives For Use In Modified Asphalt Mixtures
DOWNLOAD
Author : Rukesh Maharjan
language : en
Publisher:
Release Date : 2015
Evaluation Of Warm Mix Additives For Use In Modified Asphalt Mixtures written by Rukesh Maharjan and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2015 with Electronic books categories.
The purpose of this research effort was to evaluate the use of warm-mix additives with modified (polymer-modified and terminal blend tire rubber) asphalt mixtures from Nevada and California. This research was completed in two stages: Sasobit and Advera were evaluated in first stage while Evotherm and Foaming were evaluated in second stage. The three main components of the experimental plan include: evaluation of mixture resistivity to moisture damage, pavement performance characteristics of the mixtures, and mechanistic analysis of the mixtures for simulated flexible pavement. The moisture resistivity of all mixtures were checked by Indirect Tensile Strength (ITS), and Dynamic Modulus (E*) tests. Dynamic Modulus Ratio (ECR) and Tensile Strength Ratio (TSR) were computed at multiple Freeze-Thaw (F-T) cycles for further evaluation of moisture sensitivity of mixtures. Flow Number (FN) and Flexural beam fatigue tests were conducted to evaluate the performance characteristics of WMA additives/technology. The terminal blend tire rubber-modified binder with lime treatment works effectively in resisting moisture damage, rutting, and to significantly-reasonably improve the fatigue life of the WMA Evotherm, Foaming, Advera and Sasobit mixtures. Hence, it is the best solution for the design and construction of sustainable asphalt pavements. The use of terminal blend rubberized asphalt binder is an excellent and economical selection in reducing tire waste and environmental impacts.
Review Of Studies Conducted To Evaluate Environmental Concerns Of Crumb Rubber Modified Asphalt
DOWNLOAD
Author : M.R. Goetz
language : en
Publisher:
Release Date : 1994
Review Of Studies Conducted To Evaluate Environmental Concerns Of Crumb Rubber Modified Asphalt written by M.R. Goetz and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1994 with Asphalt-rubber categories.
Asphalt Mixtures 2001
DOWNLOAD
Author : National Research Council (U.S.). Transportation Research Board
language : en
Publisher:
Release Date : 2001
Asphalt Mixtures 2001 written by National Research Council (U.S.). Transportation Research Board and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2001 with categories.