Numerical And Experimental Investigation Of Production And Blending Mechanisms Of Asphalt Mixtures With Reclaimed Asphalt Pavement
DOWNLOAD
Download Numerical And Experimental Investigation Of Production And Blending Mechanisms Of Asphalt Mixtures With Reclaimed Asphalt Pavement PDF/ePub or read online books in Mobi eBooks. Click Download or Read Online button to get Numerical And Experimental Investigation Of Production And Blending Mechanisms Of Asphalt Mixtures With Reclaimed Asphalt Pavement book now. This website allows unlimited access to, at the time of writing, more than 1.5 million titles, including hundreds of thousands of titles in various foreign languages. If the content not found or just blank you must refresh this page
Numerical And Experimental Investigation Of Production And Blending Mechanisms Of Asphalt Mixtures With Reclaimed Asphalt Pavement
DOWNLOAD
Author : Kun Zhang
language : en
Publisher:
Release Date : 2016
Numerical And Experimental Investigation Of Production And Blending Mechanisms Of Asphalt Mixtures With Reclaimed Asphalt Pavement written by Kun Zhang and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2016 with categories.
This study investigated the production and blending mechanisms for asphalt mixtures that contain reclaimed asphalt pavement (RAP). The numerical and experimental methods used in this study can be used to assist asphalt plant design and operations to produce high quality RAP mixtures.
Experimental Study Of Hot Recycled Asphalt Mixtures With High Percentages Of Reclaimed Asphalt Pavement And Different Recycling Agents
DOWNLOAD
Author : Jinhai Yan
language : en
Publisher:
Release Date : 2014
Experimental Study Of Hot Recycled Asphalt Mixtures With High Percentages Of Reclaimed Asphalt Pavement And Different Recycling Agents written by Jinhai Yan and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2014 with Analysis of variance categories.
Hot recycled mixture has been widely used as binder course on highways in the Jiangsu Province, China. The objectives of this study were to evaluate recycled mixture's performance with different Reclaimed Asphalt Pavement (RAP) contents and recycling agents (RA). At first, optimum RA contents were determined according to asphalt blending charts based on penetration index. Secondly, the performance of recycled mixtures and control virgin asphalt mixture was evaluated based on retained stability, Tensile Strength Ratio (TSR), dynamic stability (DS), failure strain, and fatigue life. Thirdly, statistical significance on the basis of analysis of variance was evaluated as a function of RAP contents and RA type. The results indicated that adding RA could improve moisture stability, low temperature cracking resistance, while decreasing high temperature stability and strength performance of recycled mixture. Recycled asphalt mixture Sup-20 with RA has similar performance compared to virgin asphalt mixture Sup-20. The former has better moisture stability and high temperature stability than that of the latter, with a slight reduction in low temperature cracking and fatigue resistance. With a fixed RA-2, TSR, and failure strain of recycled mixes decreases, and DS first slightly decreases and then increases, while fatigue life first increases and then decreases with increasing RAP contents. The results indicated that the interface status and blending level between recycled asphalt and aggregate is variable due to the mixing process and material compositions, which results in the varied performance results of recycled mixes due to the different test temperatures, loading modes, and testing periods, etc. Furthermore, the results of analysis of variance are consistent with the experimental test results.
Improving Durability Of Asphalt Mixes Produced With Reclaimed Asphalt Pavement Rap By Enhancing Binder Blending
DOWNLOAD
Author : Hawraa Kadhim
language : en
Publisher:
Release Date : 2019
Improving Durability Of Asphalt Mixes Produced With Reclaimed Asphalt Pavement Rap By Enhancing Binder Blending written by Hawraa Kadhim and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2019 with Asphalt concrete categories.
Reclaimed Asphalt Pavement (RAP) has been favoured over virgin materials in the light of the unstable cost of virgin asphalt binders, shortage of quality aggregates, and compelling need to preserve the environment and natural resources. Mixes containing up to 20% RAP are commonly considered to have similar behaviour to virgin mixes. However, during the production process of HMA with RAP, the blending between aged and virgin binders would be partial, which would create heterogeneity in distribution of the aged recycled binder and the soft virgin binder in the HMA-RAP mixes. Hence, it is important to control the blending process between old and new binders to obtain more homogenous mix. Therefore, the main objectives of this research are to examine the kinematics of blending of aged and virgin binders by considering the time-temperature effect during mixing and silo-storage, and assess the thermo-mechanical behaviour of Hot Mix Asphalt (HMA) containing RAP at different blending states. The asphalt mixes used in this research were produced and collected at two plants (Plant 1) and (Plant 2) located in Ontario, Canada. Two Marshall mixes were produced and collected from Plant 1 including a surface course HL-3 containing 15 percent RAP and a base course HL-8 containing 30 percent RAP. These mixes were labelled as 1HL-3 and 1HL-8 respectively. In addition, two Marshall mixes were produced and collected from Plant 2 including a surface course HL-3 containing 20 percent RAP and a base course HL-8 containing 40 percent RAP. These mixes were labelled as 2HL-3 and 2HL-8 respectively. To investigate the impact of storage time on the blending progress and achieving a cohesive final binder, the mix samples were collected as a function of storage time in the silo. The first sampling was done immediately after production (t = 0-hour), and then at several time intervals of silo-storage; i.e., at 1, 4, 8, and 12 hours. In case of Plant 2, the samples were additionally collected after 24-hour of storage time. All samples were then kept in a storage room at 7ʻC until the day of compaction to minimize any further blending between aged and virgin binder. To understand the blending phenomena and its effect on the performance of the pavement, a multi-scale investigation is carried out. The blending was examined in terms of micro-mechanical and rheological properties. The microstructure of the blending zones were examined under The Environmental Scanning Electron Microscope (ESEM). In addition the effect of the silo-storage time on the rheology of the binders was investigated. The results indicate that increasing the interaction time and temperature between the aged and virgin binder significantly results in a better blending. The performance of RAP-HMA with respect to the silo-storage time was examined using Dynamic Modules Test, Thermal Stress Restrained Specimen Test (TSRST), Rutting Test, and Flexural Beam Fatigue Test. The experimental data indicates that samples collected after 12-hour of silo storage exhibited a reduction in the stiffness due to better blending of aged and virgin binder. In addition, the 12-hour samples showed enhancement in their fracture temperature, rutting depth, and fatigue life, accompanied with a better blending between their aged and virgin binder. On the other hand, the samples that collected after 24-hour silo-storage had a higher stiffness in comparison with the 8 and 12-hour samples. Moreover, the AASHTOWare Pavement Mechanistic-Empirical Design was utilized to examine the effect of the 12-hour silo-storage time on the long term performance of the pavements. Four pavement structures have been designed for this purpose. These pavements have the same structure of their granular A, granular B, and the subgrade. Yet, the first layer (surface course and base course) is a silo-storage time-dependent. The long-term field performance prediction indicates a slight improvement with the 12-hour pavements (Plant1 12hrs and Plant2 12hrs). However, it should be noted that AASHTOWare Pavement Mechanistic-Empirical Design does not appear to properly capture the effect of blending in the pavement performance. The collected experimental evidences unveils correlations between time-temperature effects and mixture performance. Based on these findings, the research provides practical recommendations to the professionals of the Canadian asphalt industry for a better use of RAP. Ultimately, this research recommends a 12-hour silo-storage time for the RAP-HMA for better performance and durability of the mixes.
Simple Performance Tester For Superpave Mix Design
DOWNLOAD
Author : Ramon Francis Bonaquist
language : en
Publisher: Transportation Research Board
Release Date : 2003
Simple Performance Tester For Superpave Mix Design written by Ramon Francis Bonaquist and has been published by Transportation Research Board this book supported file pdf, txt, epub, kindle and other format this book has been release on 2003 with Medical categories.
The global response to COVID-19 has demonstrated the importance of vigilance and preparedness for infectious diseases, particularly influenza. There is a need for more effective influenza vaccines and modern manufacturing technologies that are adaptable and scalable to meet demand during a pandemic. The rapid development of COVID-19 vaccines has demonstrated what is possible with extensive data sharing, researchers who have the necessary resources and novel technologies to conduct and apply their research, rolling review by regulators, and public-private partnerships. As demonstrated throughout the response to COVID-19, the process of research and development of novel vaccines can be significantly optimized when stakeholders are provided with the resources and technologies needed to support their response. Vaccine Research and Development to Advance Pandemic and Seasonal Influenza Preparedness and Response focuses on how to leverage the knowledge gained from the COVID-19 pandemic to optimize vaccine research and development (R&D) to support the prevention and control of seasonal and pandemic influenza. The committee's findings address four dimensions of vaccine R&D: (1) basic and translational science, (2) clinical science, (3) manufacturing science, and (4) regulatory science.
Improved Mix Design Evaluation And Materials Management Practices For Hot Mix Asphalt With High Reclaimed Asphalt Pavement Content
DOWNLOAD
Author : Randy Clark West
language : en
Publisher: Transportation Research Board
Release Date : 2013
Improved Mix Design Evaluation And Materials Management Practices For Hot Mix Asphalt With High Reclaimed Asphalt Pavement Content written by Randy Clark West and has been published by Transportation Research Board this book supported file pdf, txt, epub, kindle and other format this book has been release on 2013 with Pavements, Asphalt categories.
TRB's National Cooperative Highway Research Program (NCHRP) Report 752: Improved Mix Design, Evaluation, and Materials Management Practices for Hot Mix Asphalt with High Reclaimed Asphalt Pavement Content describes proposed revisions to the American Association of State Highway and Transportation Officials (AASHTO) R 35, Superpave Volumetric Design for Hot Mix Asphalt, and AASHTO M 323, Superpave Volumetric Mix Design, to accommodate the design of asphalt mixtures with high reclaimed asphalt pavement contents.
Investigation Of Asphalt Pavement Mixture Blending Utilizing Analytical Chemistry Techniques
DOWNLOAD
Author : Benjamin F. Bowers
language : en
Publisher:
Release Date : 2013
Investigation Of Asphalt Pavement Mixture Blending Utilizing Analytical Chemistry Techniques written by Benjamin F. Bowers and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2013 with Binders (Materials) categories.
The use of Reclaimed Asphalt Pavement (RAP) in new pavement mixtures is a topic of interest throughout the transportation industry and academia due its economic and environmental implications. There is concern however about how well the binder from the RAP blends with new, virgin binder when the mixture is created. Insufficient blending of the aged and unaged binders may compromise the long-term pavement performance. In this study, an enhanced staged extraction method is coupled with two chemical testing techniques to develop a novel approach for evaluating blending efficiency from a qualitative and quantitative perspective: Gel Permeation Chromatography (GPC) and Fourier Transform Infrared Spectroscopy (FTIR). Both chemical testing techniques can be used to study asphalt binder aging. The staged extraction method consists of washing an asphalt mixture with solvent to remove layers of asphalt binder from the binder film. The study presented in Chapter 2 uses FTIR and fractionation to investigate whether sequential dissolution of the binder fractions occurs rather than a true removal of layers. Sequential dissolution is found to occur with some common asphalt solvents that were tested, and trichloroethylene (TCE) is determined to be the best solvent for staged extraction. In Chapter 3 an approach using GPC and FTIR is used to analyze binder recovered by staged extraction to evaluate the blending efficiency of RAP and virgin binder. Partial blending of the binder is found to occur throughout the binder film. Chapter 4 explores the impact of mixing time, mixing temperature, and the addition of Warm Mix Asphalt (WMA) additives on blending efficiency using rheological testing and GPC. All mixing factors were found to impact the asphalt mixture. Blending efficiency, estimated with a blending ratio, was less than 80% in all cases. The staged extraction method is employed with FTIR in Chapter 6 to determine the most efficient way to create a laboratory-aged artificial RAP for controlled experiments. In Chapter 7 GPC was used to develop a new method of determining whether fine aggregate used in pavement mixtures is contaminated with asphalt binder, which could potentially blend with the virgin binder and compromise the pavement performance.
Proceedings Of The 5th International Symposium On Asphalt Pavements Environment Ape
DOWNLOAD
Author : Marco Pasetto
language : en
Publisher: Springer Nature
Release Date : 2019-08-29
Proceedings Of The 5th International Symposium On Asphalt Pavements Environment Ape written by Marco Pasetto and has been published by Springer Nature this book supported file pdf, txt, epub, kindle and other format this book has been release on 2019-08-29 with Science categories.
This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Performance Assessment Of Asphalt Mixes Containing Reclaimed Asphalt Pavement And Tire Rubber
DOWNLOAD
Author : Shawn Shiangfeng Hung
language : en
Publisher:
Release Date : 2018
Performance Assessment Of Asphalt Mixes Containing Reclaimed Asphalt Pavement And Tire Rubber written by Shawn Shiangfeng Hung and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2018 with categories.
The pavement community, including both agencies and industries, is moving toward more sustainable pavement designs and pavement network management. Increasing amounts of recycled materials, both reclaimed asphalt pavement (RAP) and recycled tire rubber, are expected to be used in new pavement construction projects in the future to reduce the use of virgin binder and aggregates. The main concern of using recycled materials in new asphalt pavement is the potential negative effect on the performance. Thus, the primary objective of this dissertation is to improve the current laboratory testing technologies and performance assessment approaches for characterizing the performance-related properties of asphalt mixes containing recycled materials and to improve understanding of how these properties affect the performance of asphalt pavements so that they can be designed and constructed better. A major challenge regarding the use of high RAP content mixes is the differences in the rheological properties of the virgin binder (mixes without RAP) and the blended binder (mixes with RAP). Traditionally, binder blending charts are used to determine the appropriate RAP content in asphalt mixes and the selection of virgin binder grade as part of the Superpave volumetric mix design procedures when RAP is incorporated in the mix. However, producing mixes based on blending charts that require testing of extracted and recovered RAP binders is expensive and hazardous. An alternative test approach for binder blending charts using fine aggregate matrix (FAM) mix testing is presented in this dissertation. The results demonstrated that the proposed approach could estimate the blended binder intermediate and low performance grading temperatures within ±3°C of the measured blended binder performance grading temperatures. Even though the proposed approach is not as accurate as the blending chart method (within ±2°C), it provides both cost and environmental benefits. Currently, the Superpave Performance Grading (PG) system cannot not be used to evaluate the performance-related properties of asphalt rubber binders produced using larger crumb rubber particles (maximum particle size passing 2.36 mm sieve) due to the limitations of parallel plate geometry. With the consideration of more open-graded or gap-graded rubberized hot mix asphalt (RHMA-O and RHMA-G) projects in the future, it is important to be able to perform Superpave PG testing on asphalt rubber binder and to establish performance-based contract acceptance criteria for the production of asphalt rubber binders. The test results indicated that the concentric cylinder geometry is an appropriate alternative geometry to parallel plates for quantifying the properties of asphalt rubber binders and specifically for assessing the high-temperature performance properties of binders containing crumb rubber particles larger than 250 [mu]m. Concerns have been raised with regard to incorporating reclaimed rubberized asphalt pavement (RRAP) into dense-graded new hot mix asphalt (HMA-DG) and RAP into new RHMA-G since the interactions between the virgin binder, age-hardened binder, and recycled tire rubber could considerably affect the rutting, fatigue cracking, and thermal cracking performances of new HMA-DG and RHMA-G. The fundamental differences between RAP and RRAP were identified and the performance of new mixes that contain these recycled materials were evaluated in this study. The experimental results showed that adding RRAP to HMA-DG mixes is ideal to resist rutting and low-temperature cracking based on the changes in mix stiffness. The HMA-DG mixes containing RRAP are better at resisting high tensile strain loadings than mixes containing RAP. In addition, adding RAP to RHMA-G mixes improves the rutting performance but diminishes the cracking performance, and potentially negating the benefits of selecting RHMA-G as an overlay to retard the rate of reflection cracking. Lastly, the effects of rest periods on asphalt fatigue performance considering asphalt thixotropy, non-linearity, self-heating, self-cooling, and steric hardening were also investigated in this research. The experimental test results showed that asphalt thixotropic softening and other biasing effects control the first 10 to 15 percent decrease in stiffness for unmodified binders and 15 to 35 percent decrease in stiffness for modified binders under cyclic loading, and this decrease in stiffness can be recovered with the introduction of rest periods. This means that most of the repeated loadings applied to test specimens within the thixotropic softening range do not caused any fatigue damage but only softening of the materials. Thus, by providing sufficient rest periods within the thixotropic softening range can effectively improve asphalt fatigue performance. Both the thixotropic softening range and the required time for thixotropic recovery (i.e., rest periods) need to be considered in asphalt fatigue test and mechanistic-empirical (ME) design for better evaluation of the true fatigue performance.
Blending Issues Of Hot And Warm Mix Asphalt Containing Recycled Asphalt Pavement And Recycled Asphalt Shingle
DOWNLOAD
Author : Sheng Zhao (Writer on pavements)
language : en
Publisher:
Release Date : 2014
Blending Issues Of Hot And Warm Mix Asphalt Containing Recycled Asphalt Pavement And Recycled Asphalt Shingle written by Sheng Zhao (Writer on pavements) and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2014 with Asphalt categories.
The current tendency in paving industry is to increase the use of recycled asphalt pavement (RAP) and recycled asphalt shingle (RAS). However, one of the reasons that limit the high recycled amount is the unknown blending between virgin and RAP/RAS binders. A series of studies were conducted in this dissertation to address blending issues in warm mix asphalt (WMA) and hot mix asphalt (HMA) containing RAP and RAS, in terms of evaluation of recycled binder mobilization, binder homogeneity and WMA effects on blending. Partial blending was observed in RAS mixtures and the most efficient blending occurred at approximately 5% RAS by weight. Increasing time led to a better RAS binder mobilization, while aggregate size and temperature in a certain range showed limited effects. A new parameter derived from gel permeation chromatography (GPC), large molecular size percentage [LMS(%)] related to binder molecular weight distribution, was developed to differentiate virgin and RAP/RAS binders as well as their blends, based on which a method was developed to quantify the recycled binder mobilization rate. A two-layer model based on atomic force microscopy (AFM) scanning was developed to evaluate RAS and virgin binder blending. The two binders were found to be “mixing” but not “blending” in a mixing zone of 25 to 30 micrometer. Staged extraction method used to evaluate asphalt binder homogeneity was validated with trichloroethylene (TCE) as the most effective solvent. A non-equal-time staged extraction method was proposed, in conjunction with LMS(%), to quantify binder homogenization after mechanical mixing and diffusion. Different blending scenarios of RAP/RAS mixes were proposed and validated. It was found that diffusion could be accomplished within mixture storage time for both WMA and HMA containing RAP, while blending in RAS mix was limited. WMA additives yielded mixes with higher blending ratios than control mix produced at 135oC, but lower than hot mix produced at 165oC. Laboratory foaming yielded a higher blending ratio, indicating foamed WMA may improve blending. Rutting might still be a concern for WMA-high RAP mixtures while fatigue concern may not exist. WMA-high RAP mixtures showed satisfactory moisture resistance. Blending effects on performance still needs further investigation.
Effects Of Laboratory Mixing Methods And Rap Materials On Performance Of Hot Recycled Asphalt Mixtures
DOWNLOAD
Author : Viết Hưng Nguyễn
language : en
Publisher:
Release Date : 2009
Effects Of Laboratory Mixing Methods And Rap Materials On Performance Of Hot Recycled Asphalt Mixtures written by Viết Hưng Nguyễn and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2009 with categories.
The primary work reported in this thesis is concerned mainly with the effects of different mixing methods and RAP materials on homogeneity and mechanical properties of hot recycled asphalt mixtures. The recycled asphalt mixture conforms to the requirement of BS 4987-1 (2005) for dense bitumen macadam size 10 mm (DBM 10 mm). The proportion of RAP in the recycled mixture is 40%. RAP materials are artificially aged and processed in the laboratory to prevent the variability of RAP gradation, bitumen content, and the origin. Laboratory RAP is also used to assure that every single RAP particle is an agglomerate of RAP aggregate and binder. The mixing procedures include Black Rock (BR), Complete Blending (CB), the SHRP procedure, and a newly developed field simulation method (FS). The primary difference between these methods is the mixing mechanism. The BR case implies the situation in which there is completely no interaction between RAP and virgin binder. On the contrary, RAP and virgin binder are fully interacted in the CB case. The mixing procedures for BR and CB cases conform to those for conventional asphalt mixtures. However, the bitumen for BR case is pure virgin bitumen. In addition, the bitumen for CB is the blend between RAP and virgin binder. The RAP/virgin binder proportion is 4/6. In the SHRP method, RAP is preheated at 110oC for two hours before being mixed with virgin aggregate and binder for 2 minutes at 130oC. In the FS method on the contrary, the mixing procedure duplicates what occurs in the asphalt mixing plant. RAP is mixed with superheated virgin aggregate (215oC) for different durations before this combination is blended with virgin bitumen for 2 minutes at 130oC. The RAP/superheated virgin aggregate mixing duration starts from short mixing time where RAP still exists at approximately original size and gradually increases until the change in RAP lump size is insignificant. Depending on the size of RAP used, RAP/superheated virgin aggregate mixing duration varies from 1 to 8 minutes. The homogeneity of hot recycled asphalt mixture is examined by using virgin binder with a different colour from that of RAP binder. The colour of virgin binder is obtained by mixing clear binder (Shell Mexphalt C 160/220 Pen) with iron oxide pigment. The proportion of pigment is 10% by weight of the binder making this binder red. The use of virgin binder with different colour from that of RAP binder helps to clearly differentiate the locations of RAP and virgin materials. Surfaces of slices cut from compacted recycled specimens are photographed by digital camera. The analysis of these surfaces in vertical order allows the locations of RAP material to be qualitatively identified in a 3D manner. Stiffness modulus values of samples for homogeneity assessment are also determined by indirect tensile stiffness test. The stiffness test is carried out in four directions along the circumference of each specimen with 45o angular increments. The experimental results show that the stiffness measurement in four directions can indicate the heterogeneity of recycled mixture. The variation in stiffness values in different measured directions will be substantial for heterogeneous mixtures and minor in the case where recycled mixtures are homogeneous. The results indicate there are mutual relations between mixing effort, homogeneity, and stiffness values of recycled asphalt mixtures. The longer mixing time will enhance the homogeneity and reduce the variation in stiffness values of recycled mixture. In addition, as more RAP and virgin binder are incorporated, the stiffness values of recycled mixture generally increase once the mixing time is extended. As the clear binder is dyed red by 10% by weight of iron oxide, the proportion of the pigment certainly alters the flow characteristic of binder. This might affect the mixing process and rejuvenating effect between virgin and aged binder. Therefore, the effects of mixing methods and RAP sizes on mechanical performance of hot recycled asphalt mixtures are further investigated using normal straight run bitumen 160/220 Pen as virgin binder. The assessment indicators include stiffness modulus, resistance to fatigue damage, and resistance to permanent deformation. The experimental results indicate that the conventional laboratory mixing method (SHRP) tends to overestimate the mechanical properties of recycled asphalt mixture. The long RAP preheating time that never exists in the industry coincidentally enhances the reaction between RAP and virgin binder. The long RAP preheating time also slightly alters the properties of RAP binder. For the FS method, the increase in mixing duration significantly improves the homogeneity level of recycled mixtures. The homogeneity level is also substantially affected by the size of RAP material. For the same mixing effort, the mixtures comprised of small RAP are generally more homogeneous than those made from larger RAP. The more homogeneous the mixture, the more interaction between RAP and virgin binder. Therefore, recycled mixtures become stiffer and have better resistance to permanent deformation and fatigue failure. A slightly linear increase in stiffness can result in an exponential increase in fatigue life of the recycled mixture. The mechanical properties including stiffness modulus, resistance to fatigue damage, and resistance to permanent deformation of hot recycled asphalt mixtures are not similar to those of the BR or CB mixtures, even at the favourable condition where RAP is preheated for 2 hours at 110oC in the SHRP method and 8 minutes mixing duration in the FS method. This implies that RAP does not act as Black Rock. In addition, the assumption that RAP and virgin binder are fully blended also never exists in the recycled asphalt production process.