Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads
DOWNLOAD
Download Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads PDF/ePub or read online books in Mobi eBooks. Click Download or Read Online button to get Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads book now. This website allows unlimited access to, at the time of writing, more than 1.5 million titles, including hundreds of thousands of titles in various foreign languages. If the content not found or just blank you must refresh this page
Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads
DOWNLOAD
Author : Jamal Nusairat
language : en
Publisher:
Release Date : 2011
Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads written by Jamal Nusairat and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2011 with Rock excavation categories.
This project was aimed at: (1) evaluating and developing design methods for laterally loaded drilled shafts socketed in anisotropic rock, (2) Develop a p-y criterion that can be used to analyze the response of drilled shaft socketed into transversely isotropic rock or jointed rock, (3) Develop a new methodology for determining the five elastic constants of a transversely isotropic rock medium using the in-situ pressuremeter test device, (4) Develop a new equation for estimating the transverse isotropic rock shear modulus, (G') using other elastic constants. (5) Develop a new methodology to obtain a p-y criterion using in-situ pressuremeter technique that can be used to analyze the response of drilled shaft socketed into transversely isotropic rock. The hyperbolic p-y criterion for rock proposed in SJN 134137 based on the field test data and extensive theoretical work was further validated using additional load test data. Validation of the proposed p-y criterion of rock was carried out by comparing the predictions of shaft deflections and bending moments using the hyperbolic p-y criterion against actual lateral load tests results. Based on the findings of this study, a complete solution for the design of drilled shafts socketed in anisotropic rock or intermediate geomaterials under lateral loads is provided.
Analysis Of Laterally Loaded Drilled Shafts In Rock
DOWNLOAD
Author : Ke Yang
language : en
Publisher:
Release Date : 2006
Analysis Of Laterally Loaded Drilled Shafts In Rock written by Ke Yang and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2006 with Lateral loads categories.
Drilled shafts socketed into rock are widely used as foundations for bridges and other important structures. Rock-socketed drilled shafts are also used to stabilize a landslide. The main loads applied on the drilled shafts are axial compressive or uplift loads as well as lateral loads with accompanying moments. Although there exist several analysis and design methods especially for rock-socketed drilled shafts under lateral loading, these methods were developed with assumptions without actual validations with field load test results. Some of the methods have been found to provide unsafe designs when compared to recently available field test data. Therefore, there is a need to develop a more rational design approach for laterally loaded drilled shafts socketed in rock. A hyperbolic non-linear p-y criterion for rock is developed in this study that can be used in conjunction with existing computer programs, such as COM624P, LPILE, and FBPIER, to predict the deflection, moment, and shear responses of a shaft under the applied lateral loads. Considerations for the effects of joints and discontinuities on the rock mass modulus and strength are included in the p-y criterion. Evaluations based on comparisons between the predicted and measured responses of full-scale lateral load tests on fully instrumented drilled shafts have shown the applicability of the proposed p-y criterion and the associated methods for determining the required input of rock parameters. In addition to the development of a hyperbolic p-y criterion for rock, a method for predicting lateral capacities of drilled shafts in rock and/or soils is developed for assessing the safety margin of the designed shafts against the design loads. A computer program LCPILE is developed using VC++ to facilitate computations. An elastic solution based on a variational approach is also developed for determining drilled shaft elastic deflection due to applied lateral loads in a two-layer soil layer system. The computational algorithm was coded in a Mathematical file for easy application. Finally, Briaud's method for deriving p-y curves of rock from pressuremeter or dilatometer test results is evaluated using available field test data. A modification to the Briaud's method is recommended for applications in rocks.
Drilled Shaft Manual Structural Analysis And Design For Lateral Loading By
DOWNLOAD
Author : Lymon C. Reese
language : en
Publisher:
Release Date : 1977
Drilled Shaft Manual Structural Analysis And Design For Lateral Loading By written by Lymon C. Reese and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1977 with Shafts (Excavations) categories.
Drilled shafts have been used on a limited scale for many years as an alternative to driven piles in a variety of foundation problems. However, uncertainty about the behavior of the drilled shaft has forestalled widespread adoption. The subject package, by Dr. Lymon C. Reese of the University of Texas, is intended for use by bridge engineers, geotechnical engineers, and builders of pile foundations. The manual contains rational procedures and practical guidelines for the design and construction of drilled shaft foundations. Volume I presents a rational design procedure for drilled shafts under axial loading and includes guidelines on construction methods, inspection, load testing, specifications, and cost estimates. Volume II presents alternative methods for computing the response of the shaft to lateral loading and presents the structural design of the shaft for axial and/or lateral loading.
Design Of Rock Socketed Drilled Shafts
DOWNLOAD
Author : Jamal Nusairat
language : en
Publisher:
Release Date : 2006
Design Of Rock Socketed Drilled Shafts written by Jamal Nusairat and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2006 with Bridges categories.
This project was aimed at evaluating and developing design methods for laterally loaded drilled shafts socketed in rock. Five lateral load tests on rock socketed drilled shafts with full range of instrumentation were conducted in Ohio. Detailed instrumentation included the use of vibrating wire strain gages, inclinometers, dial gages, and load cells. P-y curves representing site-specific lateral shaft-rock interaction were deduced from strain data. Field testing included the use of a borehole pressuremeter/dilatometer to obtain measurements that were correlated with rock mass strength and deformation parameters as well as with p-y curves. A comparison was made between the baseline p-y curves deduced from strain data of lateral load tests, the p-y curves predicted by using Reese's interim criterion, and the p-y curves from the pressuremeter tests in rock. A new hyperbolic p-y criterion for rock is proposed based on the field test data and extensive theoretical work. Validation of the proposed p-y criterion of rock was carried out by comparing the predictions of shaft deflections and bending moments using the hyperbolic p-y criterion against actual lateral load tests results. Based on the findings of this study, a complete solution for the design of drilled shafts socketed in rock or intermediate geomaterials under lateral loads is provided.
Rock Socketed Shafts For Highway Structure Foundations
DOWNLOAD
Author : John P. Turner
language : en
Publisher: Transportation Research Board
Release Date : 2006
Rock Socketed Shafts For Highway Structure Foundations written by John P. Turner and has been published by Transportation Research Board this book supported file pdf, txt, epub, kindle and other format this book has been release on 2006 with Bridges categories.
TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.
Load And Resistance Factor Design Of Drilled Shafts Subjected To Lateral Loading At Service Limit State
DOWNLOAD
Author : Minh Dinh Uong
language : en
Publisher:
Release Date : 2018
Load And Resistance Factor Design Of Drilled Shafts Subjected To Lateral Loading At Service Limit State written by Minh Dinh Uong and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2018 with categories.
Since 2007, the American Association of State Highway Administration Officials (AASHTO) has made utilization of Load and Resistance Factor Design (LRFD) mandatory on all federally-funded new bridge projects (AASHTO, 2007). However, currently, there are no guidelines implementing LRFD techniques for design of drilled shaft subjected to lateral loads using reliability-based analysis. On a national level, the AASHTO LRFD Bridge Design Specifications (AASHTO, 2012) specify that a resistance factor of 1.0 be used for design of drilled shafts subjected to lateral loading at service limit state, which means reliability-based analyses for calibration of resistance factors have not been performed. Therefore, there is a need to create a LRFD procedure for drilled shafts subjected to lateral loading at service limit state that has reliability-based calibrated resistance factors applicable for future projects. The research focuses on the reliability-based analysis of drilled shaft subjected to lateral loading, characterize lateral load transfer model of drilled shafts in shale, probabilistic calibrate resistance factor and contribute to the development of design procedure using LRFD. The objective of this work is to improve the design of drilled shaft subjected to lateral loading using LRFD at service limit state by providing a more reliable design procedure than the current AASHTO LRFD procedure for drilled shafts subjected to lateral loading at service limit state.
Drilled Shafts In Rock
DOWNLOAD
Author : Lianyang Zhang
language : en
Publisher: CRC Press
Release Date : 2004-05-15
Drilled Shafts In Rock written by Lianyang Zhang and has been published by CRC Press this book supported file pdf, txt, epub, kindle and other format this book has been release on 2004-05-15 with Technology & Engineering categories.
Drilled shafts in rock are widely used as foundations of heavy structures such as highway bridges and tall buildings. Although much has been learned about the analysis and design of drilled shafts in rock, all the major findings are published in the form of reports and articles in technical journals and conference proceedings. This book i
Drilled Shafts
DOWNLOAD
Author : National Highway Institute (U.S.)
language : en
Publisher:
Release Date : 1988
Drilled Shafts written by National Highway Institute (U.S.) and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1988 with Earthwork categories.
This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.
Drilled Shaft Manual Construction Procedures And Design For Axial Loading
DOWNLOAD
Author : Lymon C. Reese
language : en
Publisher:
Release Date : 1977
Drilled Shaft Manual Construction Procedures And Design For Axial Loading written by Lymon C. Reese and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1977 with Shafts (Excavations) categories.
Drilled shafts have been used on a limited scale for many years as an alternative to driven piles in a variety of foundation problems. However, uncertainty about the behavior of the drilled shaft has forestalled widespread adoption. The subject package, by Dr. Lymon C. Reese of the University of Texas, is intended for use by bridge engineers, geotechnical engineers, and builders of pile foundations. The manual contains rational procedures and practical guidelines for the design and construction of drilled shaft foundations. Volume I presents a rational design procedure for drilled shafts under axial loading and includes guidelines on construction methods, inspection, load testing, specifications, and cost estimates. Volume II presents alternative methods for computing the response of the shaft to lateral loading and presents the structural design of the shaft for axial and/or lateral loading.
Drilled Shaft Design And Construction Guidelines Manual Reese L C And Allen J D Structural Analysis And Design For Lateral Loading
DOWNLOAD
Author : Lymon C. Reese
language : en
Publisher:
Release Date : 1977
Drilled Shaft Design And Construction Guidelines Manual Reese L C And Allen J D Structural Analysis And Design For Lateral Loading written by Lymon C. Reese and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1977 with Boring categories.