Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Optimizing For Use Of Renewable Energy Sources
DOWNLOAD
Download Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Optimizing For Use Of Renewable Energy Sources PDF/ePub or read online books in Mobi eBooks. Click Download or Read Online button to get Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Optimizing For Use Of Renewable Energy Sources book now. This website allows unlimited access to, at the time of writing, more than 1.5 million titles, including hundreds of thousands of titles in various foreign languages. If the content not found or just blank you must refresh this page
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Optimizing For Use Of Renewable Energy Sources
DOWNLOAD
Author : British Standards Institute Staff
language : en
Publisher:
Release Date : 2007-10-31
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Optimizing For Use Of Renewable Energy Sources written by British Standards Institute Staff and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2007-10-31 with categories.
Buildings, Space-heating systems, Central heating, Heating, Cooling systems, Heat pipes, Water, Pipes, Heaters, Heat transfer, Thermal environment systems, Energy sources, Energy conservation, Mathematical calculations, Surfaces
Interiors Construction Manual
DOWNLOAD
Author : Gerhard Hausladen
language : en
Publisher: Walter de Gruyter
Release Date : 2012-12-10
Interiors Construction Manual written by Gerhard Hausladen and has been published by Walter de Gruyter this book supported file pdf, txt, epub, kindle and other format this book has been release on 2012-12-10 with Architecture categories.
Soccer stadiums, airports, theaters, museums – it falls to very few architects to tackle spectacular building tasks like these. The everyday work of most architects is more often focused on "manageable" projects like the renovation, remodeling, or rebuilding of single- and multi-family houses, schools, and offices. Whatever the nature of the building task, interior construction is always a significant design and qualitative challenge that calls for highly detailed technical expertise. After all, it affects the realm that will be brought to life and utilized by the user when the task is finished, and whose aesthetic and functional serviceability will be put to the test each and every day. The Interior Construction Manual supports planners in their daily work as a practical planning aid and reference work with the relevant standards, guidelines, reference details, and constructional solutions, all illustrated by built example projects. It brings together the crucial facts on all aspects of interior construction and presents the key fundamentals of building physics, fire protection, interior construction systems, and openings. In addition, it offers concrete tips on integrated planning approaches, energy and sustainability issues, materials used in interior construction, hazardous substances, and dealing with building services and light planning.
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Part 2 Design Dimensioning And Installation
DOWNLOAD
Author :
language : en
Publisher:
Release Date : 2008
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Part 2 Design Dimensioning And Installation written by and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2008 with categories.
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Part 1 Determination Of The Design Heating And Cooling Capacity
DOWNLOAD
Author :
language : en
Publisher:
Release Date : 2008
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Part 1 Determination Of The Design Heating And Cooling Capacity written by and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2008 with categories.
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Determination Of The Design Heating And Cooling Capacity
DOWNLOAD
Author : British Standards Institute Staff
language : en
Publisher:
Release Date : 2008-07-31
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Determination Of The Design Heating And Cooling Capacity written by British Standards Institute Staff and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2008-07-31 with Heating categories.
Buildings, Space-heating systems, Central heating, Heating, Cooling, Heat pipes, Hot-water central heating, Heating equipment, Water, Design, Mathematical calculations, Heat capacity, Heat transfer, Surfaces
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Design Dimensioning And Installation
DOWNLOAD
Author : British Standards Institute Staff
language : en
Publisher:
Release Date : 2008-10-31
Heating Systems In Buildings Design Of Embedded Water Based Surface Heating And Cooling Systems Design Dimensioning And Installation written by British Standards Institute Staff and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2008-10-31 with categories.
Buildings, Space-heating systems, Central heating, Heating, Cooling, Heat pipes, Hot-water central heating, Heating equipment, Water, Design, Mathematical calculations, Heat transfer, Dimensions, Installation
Optimization Of Design And Operation Of Synergetic Heating And Cooling Networks Based On The Energy Hub Concept
DOWNLOAD
Author : Hossein Ahmadisedigh
language : en
Publisher:
Release Date : 2022
Optimization Of Design And Operation Of Synergetic Heating And Cooling Networks Based On The Energy Hub Concept written by Hossein Ahmadisedigh and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2022 with categories.
In the present work, an “energy hub” template was employed to design combined heating and cooling networks to benefit from potential synergies. Heating and cooling networks are integral components of various buildings, campuses, or cities. The concept of smart thermal grid and “energy hub” argue in favor of thermal integration to benefit from potential synergies and facilitate the use of renewable energy sources. In this integrated system, heat pumps can be used to recover heat from the cooling loop and supply it to the heating loop. Waste heat recovery can help reducing operation costs and greenhouse gas emissions. Heating and cooling loads of the network can be satisfied by natural gas boilers, electric heaters, chillers, and heat pumps. The design of the system and its operation were optimized with respect to cost and greenhouse gas emissions under different combinations of heating and cooling loads. The optimized hub configurations for scenarios with and without waste heat recovery were compared, showing that heat pumps were beneficial in all scenarios. The optimal capacity of heat pumps to minimize total cost was found to be ~80% of the maximal possible value from a thermodynamic analysis of the loads. The simultaneous minimization of cost and emissions revealed a relatively sharp transition from gas to electric heating as more emphasis is put on emissions than cost, but in all cases, waste heat recovery with heat pumps was heavily used to satisfy the heating and cooling loads. Next, keeping the same framework designed above, a method was developed to indicate how thermal energy storage (TES) units can contribute to reduce the total cost of a thermal grid. We developed a method showing how TES units, coupled with heat pumps, can contribute to reducing the total cost of a thermal grid. An optimization model is introduced, based on an energy hub model including natural gas boilers, electric heaters, and chillers. For different load profiles, thermal grids integrating heat pumps alone, TES alone, or a combination of both are compared to a reference hub with no thermal integration. It was found that the inclusion of both TES and heat pumps together results in more profits than when they are used separately, extending the synergic use of the heat pumps to satisfy both heating and cooling loads. Furthermore, the benefit of TES when components of the system (chiller or boiler) are under-sized is assessed. It was observed that in these cases, TES contributes to satisfying the thermal demands. However, due to the configuration of the system, there is a limit of chiller under-sizing that TES units can compensate. Then, the influence of part-load operation of energy hub devices was studied for the same energy hub. In practice, part-load efficiency of equipment such as chillers, boilers, and heat pumps need to be taken into account in the design and control of heating and cooling networks as it can strongly affect their overall performance. However, optimization models such as energy hubs usually consider constant efficiencies due to the challenge of implementing part-load efficiency in such models. Therefore, the impact of part-load efficiency curves on energy hub optimization results is often unclear, in particular when multiple devices are included. In this work, the lifetime cost of a combined heating and cooling networks system was optimized based on an energy hub in which part-load efficiency devices (natural gas boilers, electric heaters, electric chillers, and heat pumps) were modeled. The model was linearized and studied under different combinations of thermal loads. An iterative method was developed to optimize the design and operation of the energy hub in this context. To determine the impact of part-load efficiencies, each device was individually examined while the efficiency of other devices remained constant. The error resulting from assuming a constant efficiency was then calculated based on a reference hub with constant efficiencies. The results indicated a maximum error on the total cost of 1.85%, 0.6%, and 0.16% by assuming constant-efficiency for the boilers, chillers, and heat pumps respectively. The loads for which these maximum errors occur were then chosen to optimize the hub with all devices modeled with a part-load efficiency curve. The errors increased to 1.9%, 0.71%, and 1.49%, respectively. Finally, the waste heat recovery (WHR) potential of a manufacturing workshop was assessed. First, the sources of waste heat were identified and evaluated, leading to preparation of a waste heat map for the company. Subsequently, three main WHR methods were chosen and analyzed for the plant. In the summer, the possibility of replacing the current office chillers with a 52 kW single-effect absorption chiller was investigated, which would cost 8,000 CAD more than the present chillers over 20 years. For winters, t waste heat can be used for localheating purposes instead of using the electric heating systems currently used, which would save approximately 110,000 CAD over 20 years. For the rest of the year, the internal hot water consumption for the company can be supplied by using a hybrid (WHR + electricity) water heater, which would save around 2,000 CAD over the same period.
Building Environment Design Design Dimensioning Installation And Control Of Embedded Radiant Heating And Cooling Systems Dimensioning And Calculation Of The Dynamic Heating And Cooling Capacity Of Thermo Active Building Systems Tabs
DOWNLOAD
Author : British Standards Institute Staff
language : en
Publisher:
Release Date : 1915-08-31
Building Environment Design Design Dimensioning Installation And Control Of Embedded Radiant Heating And Cooling Systems Dimensioning And Calculation Of The Dynamic Heating And Cooling Capacity Of Thermo Active Building Systems Tabs written by British Standards Institute Staff and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1915-08-31 with categories.
Buildings, Space-heating systems, Central heating, Heating, Cooling systems, Heat pipes, Water, Pipes, Heaters, Heat transfer, Thermal environment systems, Energy sources, Energy conservation, Mathematical calculations, Surfaces
Low Temperature Heating And High Temperature Cooling
DOWNLOAD
Author : Jan Babiak
language : en
Publisher:
Release Date : 2009
Low Temperature Heating And High Temperature Cooling written by Jan Babiak and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2009 with Air conditioning categories.
Heating And Cooling Concepts Employing Environmental Energy And Thermo Active Building Systems For Low Energy Buildings
DOWNLOAD
Author : Doreen E. Kalz
language : en
Publisher:
Release Date : 2011-01
Heating And Cooling Concepts Employing Environmental Energy And Thermo Active Building Systems For Low Energy Buildings written by Doreen E. Kalz and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2011-01 with Dwellings categories.
Sustainable energy concepts for buildings feature highly energy-efficient systems for heating and cooling with a significantly reduced energy use, but also respect the occupants' requirements on interior thermal comfort. This work contributes to the evaluation and optimization of heating and cooling concepts for low-energy office buildings that use environmental energy and thermo-active building systems. The meta-analysis of the buildings and the achieved results in terms of energy efficiency and thermal comfort are based on longterm monitoring campaigns in 13 buildings over several years.