Laboratory And Field Evaluation Of Polymer Modified Asphalt Binders And Mixtures
DOWNLOAD
Download Laboratory And Field Evaluation Of Polymer Modified Asphalt Binders And Mixtures PDF/ePub or read online books in Mobi eBooks. Click Download or Read Online button to get Laboratory And Field Evaluation Of Polymer Modified Asphalt Binders And Mixtures book now. This website allows unlimited access to, at the time of writing, more than 1.5 million titles, including hundreds of thousands of titles in various foreign languages. If the content not found or just blank you must refresh this page
Laboratory And Field Evaluation Of Polymer Modified Asphalt Binders And Mixtures
DOWNLOAD
Author : Hassan Faghihnia Torshizi
language : en
Publisher:
Release Date : 1991
Laboratory And Field Evaluation Of Polymer Modified Asphalt Binders And Mixtures written by Hassan Faghihnia Torshizi and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1991 with Asphalt concrete categories.
Evaluation Of Polymer Modified Asphalt In Hot Mix Pavements
DOWNLOAD
Author : Charles Ifft
language : en
Publisher:
Release Date : 1989
Evaluation Of Polymer Modified Asphalt In Hot Mix Pavements written by Charles Ifft and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1989 with Asphalt concrete categories.
Polymer modified asphalts have recently been the focus of much attention in the U.S. due to claims that polymer additives will lengthen the life of an asphalt pavement. Much of the published research on this topic has been concentrated on the effects of polymer modifiers on binder and mixture properties. The goal of this testing is to predict from laboratory testing the actual field performance of an asphalt concrete. Over the years, specifications have been developed for conventional asphalts that allow pavement performance to be predicted from certain binder tests. These conventional binder tests do not fully address the special characteristics of polymer modified asphalt binders and need revision to be an effective tool in predicting pavement service life. This paper presents the findings of a two-part laboratory research program intended to relate binder and mixture properties of polymer modified asphalts. The preliminary testing involved five asphalt binder types and a variety of binder and mixture tests. Promising test procedures were further investigated in the final testing program where ten asphalt binders were examined. Simple linear regression was used to determine the strength of a relationship between pairs of binder properties and mixture properties. The preliminary testing showed penetration, toughness and tenacity, and force ductility to have the most promise in predicting mixture performance. The final testing contained enough data to be analyzed with both simple linear regression and multiple regression. Penetration, toughness and tenacity, force ductility again were the test procedures that had binder properties that correlated well with mixture properties.
Installation And Laboratory Evaluation Of Alternatives To Conventional Polymer Modification For Asphalt
DOWNLOAD
Author : Stacey Diefenderfer
language : en
Publisher:
Release Date : 2015
Installation And Laboratory Evaluation Of Alternatives To Conventional Polymer Modification For Asphalt written by Stacey Diefenderfer and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2015 with Binders (Materials) categories.
The Virginia Department of Transportation (VDOT) specifies polymer-modified asphalt binders for certain asphalt mixtures used on high-volume, high-priority routes. These binders must meet performance grade (PG) requirements for a PG 76-22 binder in addition to elastic recovery requirements. This typically results in the use of binders containing styrene-butadiene-styrene (SBS) modifiers. However, other polymer modifiers may also be used to achieve the PG 76-22 classification. One of these modifiers is a copolymer of SBS and polyethylene (PE) (SBS-PE) another modifier is ground tire rubber (GTR). This study was undertaken to investigate the suitability of SBS PE modified PG 76-22 binder and GTR-modified PG 76-22 binder for use in Virginia. Each modified binder was used in a 12.5 mm nominal maximum aggregate size mixture to pave approximately 2.3 lane-miles. All mixtures were produced as warm mix asphalt using a foaming system. The binders evaluated included a typical SBS polymer-modified binder as a control and binders modified with SBS-PE and GTR. During construction, all processes were documented and material was sampled for evaluation. Binder and mixture tests were performed. Binder testing included performance grading and multiple stress creep and relaxation testing. Mixture testing included volumetric analysis, dynamic modulus, and flow number tests and cracking, rutting, and fatigue analysis. Binder testing indicated that the control binder and SBS PE modified binders met VDOT specifications for classification as a PG 76-22 binder; the GTR-modified binder graded to a PG 70-22 binder, as it did not meet the PG 76-22 high-temperature specification and did not pass the elastic recovery requirement. Laboratory mixture testing indicated that the performance of the SBS PE modified mixture should be similar to that of the control mixture. Laboratory test results for the GTR-modified mixture were mixed, with some indicating that the performance was similar to that of the control mixture and some indicating that the performance may be less than that of the control. Based on the study, SBS PE modified binders should continue to be allowed as an alternative to SBS-modified binder provided specifications for PG 76-22 binders are met. However, further investigation of GTR-modified binders is suggested before recommendations can be made. In addition, long-term evaluation of the field site is recommended for validation of the laboratory findings.
Laboratory And Field Performance Evaluation Of Pavement Sections With High Polymer Modified Asphalt Overlays
DOWNLOAD
Author : Jhony Habbouche
language : en
Publisher:
Release Date : 2021
Laboratory And Field Performance Evaluation Of Pavement Sections With High Polymer Modified Asphalt Overlays written by Jhony Habbouche and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2021 with Pavements, Asphalt concrete categories.
In 2014, researchers at the Virginia Transportation Research Council initiated a study to evaluate the effectiveness of using high polymer-modified (HP) binders in surface asphalt concrete (AC) mixtures. The results were promising enough to support a field study investigating the use of HP binders in asphalt mixtures over jointed concrete pavement. Since 2015, HP AC overlays have been placed at several sections over existing jointed concrete pavement and cracked asphalt pavements in an effort to mitigate reflective cracking. The purpose of this study was to assess the viability of using HP AC mixtures in Virginia as a reflective crack mitigation technique or when deemed appropriate as a tool for increased crack resistance on higher volume facilities. Information on the state of the practice and lessons learned from the use of HP AC mixtures in the United States and Canada are also provided. In general, HP AC mixtures have been used in a wide range of applications under heavy traffic on interstates and slow-braking loads at intersections. No major field-related construction issues in terms of mixing temperatures and in-place compaction of HP AC mixtures were reported and standard construction practices and equipment were used. Good communication between the polymer/binder supplier and the contractor and solid planning prior to the work being conducted were important lessons learned with regard to paving with HP AC mixtures. The performance characteristics of conventional polymer-modified asphalt (PMA) and HP field-produced mixtures were evaluated in the laboratory in terms of durability and resistance to rutting and cracking. Based on the mixtures tested in this study, HP AC mixtures showed better performance when compared with PMA mixtures regardless of the mixture type (dense-graded surface mixtures and stone matrix asphalt [SMA]). Moreover, SMA mixtures showed better performance when compared with surface mixtures regardless of the asphalt binder type (PMA and HP). Overall, SMA-HP mixtures showed the most promising performance among all evaluated PMA and HP mixtures. Distress survey data collected from VDOT’s Pavement Management System of HP field sections were compiled, documented, and compared with that of their control PMA sections. The HP sections showed the most promising performance 5 years after construction (2015-2020) regardless of the traffic level and the pre-existing pavement conditions. In general, none of the evaluated mixtures (HP or PMA) was able to stop reflective cracking totally. Moreover, performance evaluations using the network-level pavement management data were conducted to estimate the life expectancy of HP AC overlays. Overall, PMA and HP AC overlays had an average predicted service life of 6.2 and 8.3 years, respectively, indicating a 34% extension of performance life of the AC overlays with HP modification. The study recommends continued assessment of the as-constructed properties in future HP projects for the purpose of compiling a materials characterization database. Further, the performance of all existing and future HP sections should be monitored. This will help in updating and revising the service life prediction models and the cost-effectiveness of using HP AC mixtures as the existing sections continue to age and more data are available. Finally, the use of the balanced mix design approach should be investigated to promote further the design of more durable and longer-lasting PMA and HP mixtures in Virginia.
Long Term Performance Evaluation Of Polymer Modified Asphalt Concrete Pavements
DOWNLOAD
Author : William E. Elmore
language : en
Publisher:
Release Date : 1993
Long Term Performance Evaluation Of Polymer Modified Asphalt Concrete Pavements written by William E. Elmore and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1993 with Pavements, Asphalt concrete categories.
Following the five-year study performed to investigate the behavior of binders and asphalt mixtures containing polymer modifiers, it was determined that an insufficient amount of time had elapsed to allow any determinations to be made based upon the special field test sections. The study reported herein was to extend that initial time and to study in depth those special test sections, using visual observations coupled with resulting tests performed on samples extracted from the sections and comparisons with the original data developed in the original research. The research includes laboratory testing of field samples, determining the aging effect on the control and modified binders and corresponding effect on the mixtures, and visual evaluations. Retained samples of the original asphalts were also evaluated for potential performance as determined by the performance-based asphalt binder specification developed by the Strategic Highway Research Program. Four hot mix pavement field projects were constructed in the Tyler, Lufkin, San Antonio, and Childress Districts (10, 11, 15, and 25, respectively), and two seal coat projects were placed in the Odessa and Bryan Districts (6 and 17).
Laboratory Mix Design And Field Evaluation Of Modified Asphalt Binders
DOWNLOAD
Author : Serji Amirkhanian
language : en
Publisher:
Release Date : 2003
Laboratory Mix Design And Field Evaluation Of Modified Asphalt Binders written by Serji Amirkhanian and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2003 with Binders (Materials) categories.
Polymer Modified Asphalt Binders
DOWNLOAD
Author : Kenneth R. Wardlaw
language : en
Publisher: ASTM International
Release Date : 1992
Polymer Modified Asphalt Binders written by Kenneth R. Wardlaw and has been published by ASTM International this book supported file pdf, txt, epub, kindle and other format this book has been release on 1992 with Asphalt categories.
"ASTM Publication Code Number (PCN) 04-011080-08. - "Sponsored by ASTM Committee D-4 on Road and Paving Materials."-- Foreword. - Includes bibliographical references and indexes. - Electronic reproduction; W. Conshohocken, Pa; ASTM International; 2011; Mode of access: World Wide Web; System requirements: Web browser; Access may be restricted to users at subscribing institutions.
Laboratory Evaluation Of Polymer And Multi Grade Asphalt Binders
DOWNLOAD
Author : Roderick W. Monroe
language : en
Publisher:
Release Date : 1992
Laboratory Evaluation Of Polymer And Multi Grade Asphalt Binders written by Roderick W. Monroe and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1992 with Pavements, Asphalt categories.
Laboratory Study Of Test Methods For Polymer Modified Asphalt In Hot Mix Pavement
DOWNLOAD
Author :
language : en
Publisher:
Release Date : 1989
Laboratory Study Of Test Methods For Polymer Modified Asphalt In Hot Mix Pavement written by and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 1989 with Binders (Materials) categories.
Evaluation Of Solid Polymer Modified Asphalt Mixtures
DOWNLOAD
Author : Christopher J. DeCarlo
language : en
Publisher:
Release Date : 2020
Evaluation Of Solid Polymer Modified Asphalt Mixtures written by Christopher J. DeCarlo and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2020 with Pavements, Flexible categories.