Laboratory And Field Evaluation Of Warm Mix Asphalt Technology To Determine Its Applicability For Massachusetts
DOWNLOAD
Download Laboratory And Field Evaluation Of Warm Mix Asphalt Technology To Determine Its Applicability For Massachusetts PDF/ePub or read online books in Mobi eBooks. Click Download or Read Online button to get Laboratory And Field Evaluation Of Warm Mix Asphalt Technology To Determine Its Applicability For Massachusetts book now. This website allows unlimited access to, at the time of writing, more than 1.5 million titles, including hundreds of thousands of titles in various foreign languages. If the content not found or just blank you must refresh this page
Laboratory And Field Evaluation Of Warm Mix Asphalt Technology To Determine Its Applicability For Massachusetts
DOWNLOAD
Author : Walaa S. Mogawer
language : en
Publisher:
Release Date : 2008
Laboratory And Field Evaluation Of Warm Mix Asphalt Technology To Determine Its Applicability For Massachusetts written by Walaa S. Mogawer and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2008 with Pavements categories.
Laboratory And Field Evaluation Of Warm Mix Asphalt
DOWNLOAD
Author : Alexander Jordan Austerman
language : en
Publisher:
Release Date : 2009
Laboratory And Field Evaluation Of Warm Mix Asphalt written by Alexander Jordan Austerman and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2009 with categories.
Laboratory Evaluation Of Warm Mix Asphalt
DOWNLOAD
Author : Zhanping Yuo
language : en
Publisher:
Release Date : 2011
Laboratory Evaluation Of Warm Mix Asphalt written by Zhanping Yuo and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2011 with Asphalt emulsion mixtures categories.
Hot Mix Asphalt (HMA) has been traditionally produced at a discharge temperature of between 280° F (138° C) and 320° F (160° C), resulting in high energy (fuel) costs and generation of greenhouse gases. The goal for Warm Mix Asphalt (WMA) is to use existing HMA plants and specifications to produce quality dense graded mixtures at significantly lower temperatures. Europeans are using WMA technologies that allow the mixture to be placed at temperatures as low as 250° F (121° C). It is reported that energy savings on the order of 30%, with a corresponding reduction in CO2 emissions of 30%, are realized when WMA is used compared to conventional HMA. Although numerous studies have been conducted on WMA, only limited laboratory experiments are available and most of the current WMA laboratory test results are inconsistent and not compatible with field performance The main objectives of this study are: The main objectives of this study are: 1) review and synthesize information on the available WMA technologies; 2) measure the complex/dynamic modulus of WMA and the control mixtures (HMA) for comparison purpose and for use in mechanistic-empirical (ME) design comparison; 3) assess the rutting and fatigue potential of WMA mixtures; and 4) provide recommendation for the proper WMA for use in Michigan considering the aggregate, binder, and climatic factors. The testing results indicated that most of the WMA has higher fatigue life and TSR which indicated WMA has better fatigue cracking and moisture damage resistant; however, the rutting potential of most of the WMA tested were higher than the control HMA. In addition, the WMA design framework was developed based on the testing results, and presented in this study to allow contractors and state agencies to successfully design WMA around the state of Michigan.
Laboratory Evaluation Of Warm Mix Asphalt Influence On Theoretical Maximum Specific Gravity
DOWNLOAD
Author : Jianhua Yu
language : en
Publisher:
Release Date : 2012
Laboratory Evaluation Of Warm Mix Asphalt Influence On Theoretical Maximum Specific Gravity written by Jianhua Yu and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2012 with Asphalt concrete categories.
Warm mix asphalt (WMA) technology provides sufficient workability for asphalt mixtures at reduced mixing and compaction temperatures. Depending on the WMA technology, the typical temperature reduction range is 20 °C to 55 °C below hot mix asphalt (HMA) production temperatures. WMA involves chemical and wax additives that are added to an asphalt binder or incorporated through the use of foaming technology. The main advantages of WMA are reduced emissions and a reduction in combustible fuel consumption. Ongoing WMA research projects have documented some differences between HMA and WMA mixes, prompting numerous research projects that are investigating these concerns. The purpose of this research is to evaluate the volumetric properties by directly comparing laboratory produced WMA and HMA mixes. This study investigates the impact of WMA additives on the volumetric properties, specifically, the theoretical maximum specific gravity (Gmm). The Gmm testing followed the procedure of ASTM D2041. Two mix designs with HMA binder were produced, one without recycled asphalt pavement (RAP) and the other with 30 % RAP. After the mix designs were completed, no additional changes were made to account for the addition of the WMA technology. The mixes included the WMA technologies Sasobit and Advera, as well as an HMA control, for a total of six different laboratory produced mixes. Each mix was produced at 120 °C, 135 °C, and 150 °C, and each mix was oven cured for 1, 2, and 4 h. The test results were analyzed using statistical principles to determine whether differences in the Gmm values were statistically significant. The results show that temperature has little impact on Gmm. Gmm was not affected by curing times of 1 and 2 h, but the longer curing time of 4 h resulted in a statistically significant increase in Gmm. Further analysis revealed that the mix sensitivity to curing time depends on the amount of RAP in the mix. For the mix designs studied, the Advera Gmm values were similar to the HMA values, but the Sasobit Gmm values were statistically lower than the Advera values.
Evaluation Of Warm Mix Asphalt Technologies With Respect To Binder Aging And Emissions
DOWNLOAD
Author : Faramarz Farshidi
language : en
Publisher:
Release Date : 2012
Evaluation Of Warm Mix Asphalt Technologies With Respect To Binder Aging And Emissions written by Faramarz Farshidi and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2012 with categories.
In recent years Warm Mix Asphalt (WMA) technologies have been used to modify asphalt binders, with the following objectives: to decrease production and construction temperatures, reduce fumes and emissions, increase haul distance, and improve the workability of the mix. Reduced temperatures at the plant and during laydown and compaction are hypothesized to positively impact long-term oxidative aging behavior due to less oxidation/aging and result in less emissions during production and construction due to reduced production and construction temperatures. The purpose of this investigation was to quantify these improvements with respect to long-term oxidative aging in the field and environmental benefits with respect to volatile organic compounds, semi-volatile organic compounds and poly cyclic aromatic hydrocarbons in order to confirm or deny this hypothesis. This research evaluated the potential durability of WMA and Rubberized Warm Mix Asphalt (R-WMA) binders with respect to long-term aging through characterization of field-aged binders extracted and recovered from field cores. The results were compared to the control conventional Hot Mix Asphalt (HMA) and Rubberized Hot Mix Asphalt (R-HMA) samples. Binders were extracted and recovered from thirteen different test sections and a total of seven different WMA technologies were evaluated in this study. The Dynamic Shear Rheometer (DSR) was used to evaluate the rheological properties of the binders at high temperatures with respect to rutting performance in the field. The Bending Beam Rheometer (BBR) was used to characterize low temperature properties of the binder samples. A new testing procedure was developed to measure and characterize the rheological properties of the R-HMA and R-WMA binders with respect to performance-related properties in the field. The rheological results indicated that depending on the WMA technology used, the addition of WMA technologies and reduced production and compaction temperatures result in increase or decrease rutting resistance performance for WMA and R-WMA binders with respect to permanent deformation at high temperatures in the field. Both WMA and R-WMA binders studied meet the established thermal cracking criteria with respect to low temperature cracking in the field. The aging kinetics curves for WMA-treated binders are parallel to the control binders and the addition of WMA technologies including organic, chemical and mechanical foaming technologies studied in this research did not result in a different aging kinetics trend with respect to long-term aging in the field. A portable "flux" chamber was designed and fabricated to capture and directly measure emissions during paving operations. Emissions were collected in activated charcoal sorbent tubes for characterizing volatile organic compounds and semi-volatile organic compounds. XAD-2 resin tubes and filters were used to capture the gaseous phase and particulate phase of the PAH compounds, respectively. A reliable analytical method was developed to identify and quantify alkane emissions using gas chromatography mass spectrometry (GC/MS) in the laboratory. A separate method was developed for identification and characterization of trace level PAH compounds of the asphalt fumes. The results demonstrated that the warm mix asphalt technology type, plant mixing temperature and level of compaction significantly influence the emission characteristics throughout paving operations. Moreover, the emissions kinetics indicated that the majority of the reactive organic gases are volatilized in the first hour after sampling initiation (immediately after production and before compaction). To better understand and identify any chemical composition changes of the binder due to WMA technologies, nuclear magnetic resonance spectroscopy (NMR) was used for understanding structural complexities of HMA and WMA binder molecules. Qualitative analysis of both carbon and hydrogen atoms with HMA and WMA binders showed that the molecular structures of the binders are not significantly changed by the effect of WMA technologies.
Evaluation Of Warm Mix Asphalt Technology For Urban Pavement Rehabilitation Projects
DOWNLOAD
Author : Salvatory Materu
language : en
Publisher:
Release Date : 2020
Evaluation Of Warm Mix Asphalt Technology For Urban Pavement Rehabilitation Projects written by Salvatory Materu and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2020 with categories.
Warm Mix Asphalt (WMA) technology has the capability of lowering the temperature at which the asphalt is mixed and compacted by 30°C or more without compromising the performance of asphalt pavement. The reduced difference between asphalt mix and ambient temperature results in a lower cooling rate thus allows for long haul, sufficient compaction time and late season projects compared to the conventional Hot Mix Asphalt (HMA). In northern climate, asphalt paving season is relatively short and paving is often done late in the season when weather conditions are less than ideal. The potential benefit of WMA, among others, is an extended paving season for the City of Winnipeg. Reduction in production temperature also comes with other positive impacts both economically and environmentally. The objective of this study is to evaluate the installation of WMA, compile experiences with this technology and evaluate their effects on construction methods and performance. The study further attempts to evaluate the effectiveness of the WMA chemical additives and its dosage rate as liquid anti-strip agents on the properties of WMA mixtures through field and laboratory testing programs. In addition to the overall effectiveness of WMA, the study aimed to evaluate its economic cost relative to Hot Mix Asphalt (HMA). A chemical additive was used at three different dosages (0.3, 0.5 and 0.7 percent by weight of asphalt cement). The additive has the ability to improve mixing, aggregate coating, workability, compaction and adhesion with no change in materials or job mix formula required. The study showed that WMA could be successfully placed using conventional HMA paving practices and procedures. Among the different additive dosages used, 0.5% had a better overall performance. The moisture sensitivity tests indicated the highest Tensile Strength Ratio (TSR) at this dosage, suggesting the lowest moisture damage susceptibility. All four mixtures had low rutting resistance potential with no significant difference among them. The WMA showed a higher cracking resistance compared to HMA. The WMA price was between 2% to 11% higher than conventional HMA including the costs of additional testing as well as the WMA additives.
Laboratory Evaluation Of Warm Mix Asphalt Technologies For Moisture And Rutting Susceptibility
DOWNLOAD
Author : Haritha Malladi
language : en
Publisher:
Release Date : 2012
Laboratory Evaluation Of Warm Mix Asphalt Technologies For Moisture And Rutting Susceptibility written by Haritha Malladi and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2012 with categories.
Laboratory Evaluation Of Warm Mix Asphalt
DOWNLOAD
Author : Zhanping Yuo
language : en
Publisher:
Release Date : 2011
Laboratory Evaluation Of Warm Mix Asphalt written by Zhanping Yuo and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2011 with Asphalt emulsion mixtures categories.
Hot Mix Asphalt (HMA) has been traditionally produced at a discharge temperature of between 280° F (138° C) and 320° F (160° C), resulting in high energy (fuel) costs and generation of greenhouse gases. The goal for Warm Mix Asphalt (WMA) is to use existing HMA plants and specifications to produce quality dense graded mixtures at significantly lower temperatures. Europeans are using WMA technologies that allow the mixture to be placed at temperatures as low as 250° F (121° C). It is reported that energy savings on the order of 30%, with a corresponding reduction in CO2 emissions of 30%, are realized when WMA is used compared to conventional HMA. Although numerous studies have been conducted on WMA, only limited laboratory experiments are available and most of the current WMA laboratory test results are inconsistent and not compatible with field performance The main objectives of this study are: The main objectives of this study are: 1) review and synthesize information on the available WMA technologies; 2) measure the complex/dynamic modulus of WMA and the control mixtures (HMA) for comparison purpose and for use in mechanistic-empirical (ME) design comparison; 3) assess the rutting and fatigue potential of WMA mixtures; and 4) provide recommendation for the proper WMA for use in Michigan considering the aggregate, binder, and climatic factors. The testing results indicated that most of the WMA has higher fatigue life and TSR which indicated WMA has better fatigue cracking and moisture damage resistant; however, the rutting potential of most of the WMA tested were higher than the control HMA. In addition, the WMA design framework was developed based on the testing results, and presented in this study to allow contractors and state agencies to successfully design WMA around the state of Michigan.
Laboratory And Field Evaluation Of Hot Mix Asphalt With High Contents Of Reclaimed Asphalt Pavement
DOWNLOAD
Author : Clinton Isaac Van Winkle
language : en
Publisher:
Release Date : 2014
Laboratory And Field Evaluation Of Hot Mix Asphalt With High Contents Of Reclaimed Asphalt Pavement written by Clinton Isaac Van Winkle and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2014 with Pavements, Asphalt categories.
Currently in Iowa, the amount of RAP materials allowed for the surface layer is limited to 15% by weight. The objective of this project was to develop quality standards for inclusion of RAP content higher than 15% in asphalt mixtures. To meet Superpave mix design requirements, it was necessary to fractionate the RAP materials. Based on the extensive sieve-by-sieve analysis of RAP materials, the optimum sieve size to fractionate RAP materials was identified. To determine if the higher percentage of RAP materials than 15% can be used in Iowa's state highway, three test sections with 30.0%, 35.5% and 39.2% of RAP materials were constructed on Highway 6 in Iowa City. The construction of the field test sections was monitored and the cores were obtained to measure field densities of test sections. Field mixtures collected from test sections were compacted in the laboratory in order to test the moisture sensitivity using a Hamburg Wheel Tracking Device. The binder was extracted from the field mixtures with varying amounts of RAP materials and tested to determine the effects of RAP materials on the PG grade of a virgin binder. Field cores were taken from the various mix designs to determine the percent density of each test section. A condition survey of the test sections was then performed to evaluate the short-term performance.
Evaluation Of Laboratory Conditioning Protocols For Warm Mix Asphalt
DOWNLOAD
Author : Fan Yin
language : en
Publisher:
Release Date : 2013
Evaluation Of Laboratory Conditioning Protocols For Warm Mix Asphalt written by Fan Yin and has been published by this book supported file pdf, txt, epub, kindle and other format this book has been release on 2013 with categories.
Warm-Mix Asphalt (WMA) refers to the asphalt concrete paving material produced and placed at temperatures approximately 50°F lower than those used for Hot-Mix Asphalt (HMA). Economic, environmental and engineering benefits have boosted the use of WMA technology across the world during the past decade. While WMA technology has been successfully utilized as a paving material, several specifications and mix design protocols remain under development. For example, currently, there is no consistent laboratory conditioning procedure for preparing WMA specimens for performance tests, despite being essential for mix performance. Based on previous studies, several candidate conditioning protocols for WMA Laboratory Mixed Laboratory Compacted (LMLC) and off-site Plant Mixed Laboratory Compacted (PMLC) specimens were selected, and their effects on mixture properties were evaluated. Mixture stiffness evaluated in a dry condition using the Resilient Modulus (MR) test (ASTM D-7369) was the main parameter used to select a conditioning protocol to simulate pavement stiffness in its early life. The number of Superpave Gyratory Compactor (SGC) gyrations to get 7±0.5% air voids (AV) was the alternative parameter. Extracted binder stiffness and aggregate orientation of field cores and on-site PMLC specimens were evaluated using the Dynamic Shear Rheometer (DSR) (AASHTO T315) and image analysis techniques, respectively. In addition, mixture stiffness in a wet condition was evaluated using the Hamburg Wheel-Track Test (HWTT) (AASHTO T324) stripping inflection point (SIP) and rutting depth at a certain number of passes. Several conclusions are made based on test results. LMLC specimens conditioned for 2 hours at 240°F (116°C) for WMA and 275°F (135°C) for HMA had similar stiffnesses as cores collected during the early life of field pavements. For off-site PMLC specimens, different conditioning protocols are recommended to simulate stiffnesses of on-site PMLC specimens: reheat to 240°F (116°C) for WMA with additives and reheat to 275°F (135°C) for HMA and foamed WMA. Additionally, binder stiffness, aggregate orientation, and overall AV had significant effects on mixture stiffness. Mixture stiffness results for PMFC cores and on-site PMLC specimens in a wet condition as indicated by HWTT agree with those in a dry condition in MR testing. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/148143